Sinbosen FP10000Q 2100w 4 Channel Neu verbesserte Version Leistungsstärkerer professioneller Leistungsverstärker
Verstärker für Subwoofer

Sinbosen FP24000 Hochleistungsverstärker Profi 2 Kanal 10000 Watt Endstufe für 18/21 Zoll Subwoofer

punkt nr.: FP24000
Modell: FP24000
Kanal: 2-Kanal-Leistungsverstärker
Ausgangsleistung:
8Ω Stereoleistung (RMS): 4.200W X 2CH
4Ω Stereoleistung (RMS): 7.500W X 2CH
Klasse: TD Leistungsverstärker
Zertifizierung: CE, ROHS, TÜV
Garantie: 3 Jahre
Sonderservice: OEM-Serv
beschreibung
Sinbosen Audio FP Series Amplifier
  FP10000Q FP9000 FP14000 FP24000 FP7000 FP20000Q FP22000Q
8 ohm Stereo Power  (RMS) 1350WX4 1800WX2 2400WX2 4200WX2 1500WX2 2200WX4 2500WX4
4 ohm Stereo Power  (RMS) 2100WX4 3000WX2 4400WX2 7500WX2 2800WX2 4000WX4 4650WX4
8 ohm Bridged Power (RMS) 4200WX2 6000W 8800W   5600W 8000WX2 9300WX2
4 ohm Bridged Power (RMS) 5000WX2 9000W 14000W   7000W 9000WX2 15000WX2
Frequency Response(+o/-0.3dB,1W/8Ω): 20 Hz - 34 kHz          
THD 20 Hz - 20 kHz for 1W: <0.1%     
Signal-to-Noise Ratio: >112 dBA  
Channel separation (Crosstalk) at 1 kHz : >70 dB 
Input Connectors (per channel): 3 pin XLR, electronically balanced  
Output Connectors (per channel): Binding Posts 2-pole 
Class: TD    
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn on/off transient, current inrush, sub/ultrasonic input  
Operating voltage, 220V / 110V nominal: 180-240 V / 90-130 V selectable 
Voltage Gain(dB): 23, 26, 29, 32, 35, 38, 41, 44 dB selectable 
Input impedance: 20 kOhm 
Level adjustment (per ch.): Front panel potentiometer, 31 positions detented from -inf to 0 dB

 
 
 
 
 
      
  
 
         







Feature:

2 Channel Class TD Switching power amplifier 
2 x 7500 into 4 Ohms, 2 x 4200 Watts Watts into 8 Ohms
Create SUPER BASS sound, suitable for subwoofers 21 inches and above.
Separately controllable on Gain
Scalable Voltage Peak Limiter (VPL)
Bridge-mode operation for Touring Applications.
Comprehensive protection scheme.
Use Original Siemens high quality capacitor 3600uf 200V.
Use Original ONSEMI transistor.
Neutrik XLR*/Speakon connectors.
Extended heatsink board to 69 mm.

Please read following before buying , It’s important ! Thanks for your time.

♦Impedance Matching : 
Our amplifier suitable for impedance above 4ohms and above. 

♦How to match our amplifier with your speaker ? 

For the Line array or full range speaker , the RMS power of amplifier is 1.5 times than the speaker's RMS power. For the subwoofer, the RMS power of amplifier is twice than the subwoofer.





                            

 
         

überprüfung

Abonnieren Sie uns für Produktaktualisierungen und Werbeaktionen!