Product News
FP10000Q mit 2 Stück KA-1 Dual 15-Zoll-Lautsprechern verbinden!
: 2301
: 2023-08-31 23:59:36
The FP10000Q can connect with 2 pieces K1 dual 15 inch line array speaker, making it the ideal professional stage setup. This high performance, class TD 4 channel amplifier offers a powerful yet reliable solution for powering your audio system. The K1 high end full range line array speakers provide a wide coverage area with excellent sound quality, making them the perfect choice for any professional performance.
The connection between FP10000Q and K1 is as shown below：
The K1 line array speaker was previously connected with jumper cables, while the K1 line array speaker used an 8-core Ca com connector
AB channel with two bass each
4 mid-range tones in channel C
D channel is responsible for all high tones
Question: D channel only has high pitched sound, and the power is relatively low. Do you need to limit the amplitude of the amplifier, otherwise the horn will be burned out?
Answer: No, but we need to adjust the volume ratio and pressure limit on the processor.
Sinbosen has other amplifiers that can be matched with the K1.The LA12X, like the FP10000Q, also can drive 2pcs of K1 Line Array Speaker.
More audio matching solutions contact us:
sales2@sinbosen.com
Whatsapp:https://api.whatsapp.com/send?l=en&phnoe=8616676738225
Website:https://www.sinbosenaudio.com/
 |
 |
|
8Ω Stereo Power (RMS): 1,350W X 4CH 4Ω Stereo Power (RMS): 2,100W X 4CH |
Power Handling: LF 2 x 600W
Components:LF: 2X15" MF: 4X6.5" HF: 3X3'' Frequency Response(-3dB):35Hz-20KHz MAX SPL: 147dB Impedance：8Ω |
|
FEATURE:
Strong driving force powerful bass stable operation Efficient heat dissipation |
FEATURE: Neodymium magnetic speaker First-class wooden box Polyurea paint coating Convenient and tough rigging |
The connection between FP10000Q and K1 is as shown below：
The K1 line array speaker was previously connected with jumper cables, while the K1 line array speaker used an 8-core Ca com connector
AB channel with two bass each
4 mid-range tones in channel C
D channel is responsible for all high tones
Question: D channel only has high pitched sound, and the power is relatively low. Do you need to limit the amplitude of the amplifier, otherwise the horn will be burned out?Answer: No, but we need to adjust the volume ratio and pressure limit on the processor.Sinbosen has other amplifiers that can be matched with the K1.The LA12X, like the FP10000Q, also can drive 2pcs of K1 Line Array Speaker.
More audio matching solutions contact us:
sales2@sinbosen.comWhatsapp:https://api.whatsapp.com/send?l=en&phnoe=8616676738225
Website:https://www.sinbosenaudio.com/
